The bigger the wheels get the more important are control and support over your skates. TRINITY puts skating to a new level. Skates featuring the TRINITY 3-point mounting outperform the standard mounting by far. TRINITY skates have the lowest possible center of gravity, which makes them easier to control and more reactive. You are also faster and more agile thanks to the better power transfer. Crush the competition with TRINITY.
ALL PRODUCT INFORMATIONS
PS V. Trinity composite fiber
PS Grave Digger Trinity AL
Digger 200mm air tire
Wicked rustproof ABEC 7
The Trinity composite shell is not symmetric like most of the shells you can find on our skates. Our shell is perfectly shaped and anatomically built for left and right feet in order to create a better fit and performance. The shell is made out of a special nylon composite with fiberglass mixed into the material. This makes the shell strong and supportive. The bottom of the shell is ventilated and incorporates the X-design to guarantee torsion stiffness and perfect power transfer in every stride.
The cuff is light and very supportive giving you perfect lateral support. It is made out of a special nylon composite with added fiberglass to make it strong and supportive. The asymmetrical shape of the cuff, which fits perfectly to the shell, adds further strength to the construction. The buckle is a clean and stylish fast lock buckle system.
The pat pending Powerslide Trinity aluminium frame is a top of the line frame made of high end 6061 aircraft aluminium. It is based on a double voided construction. The extra bridges increase the stiffness and help to lower the weight. The frame is very well balanced and super stiff thanks to its special 3-point mounting construction and general distribution of the forces through 3 mounting points. The frame scores with superior finish. The combination of the across slot in the frame and the along slot in our boots is called the X-Slot Mounting. This system enables you to adjust the boot-frame setup without any dead spot according to your skating style and preferences. This special feature is unique in the off road skate category! Powerslide is the ONLY skate brand that offers the skater the possibility to adjust the position of his frame fitting the personal preferences and skating skills!
The 200mm x 50mm air tires come with a 2 piece aluminium rim, which can easily disassembled in case you need to replace or fix a punctured tube. The rubber outer jacket is reinforced with Vectran fibers adding strength to the jacket. The tire has an off road profile for better grip. The tires are inflatable up to maximum 4,1bar / 60 psi. They provide a comfortable ride by absorbing most impacts. These 200mm size wheels have a wide profile and roll smoothly on uneven ground and are perfect for off and on road skating.
WICKED (WCD) is a new high end bearing brand specializing in all kinds of rollsport. WCD is made of the best available raw materials and crafted with high quality to guarantee a fast and smooth ride but also a long lifetime. Wicked freespin ABEC 9 bearings are superior in quality and performance. They feature a one side rubber coated metal shields. The bearing contains 7 chrome steel balls. High viscosity oil made in Germany is used for this high tech bearing.
For more information check out the Wicked website under: www.wicked-hardware.com
Ultra light and breathable nylon mesh
Comfortable and strong lining which is also resitant to abrasion
Adjustable brake system
The upper of the skate is made of nylon webbing, which includes internal reinforcements and PU Nano leather applications. This combination offers a nice wrap around and snug fit on one side, but also good support, which is needed for a high speed performance skate like this. The tongue is anatomically pre-shaped. You will like the comfortable fit from the first moment you step into the skate. The Grave Digger comes with regular waxed laces which tighten your boot effectively. The ratchet buckle locks your heel in place for a perfect power transfer.
The padding for this skates was designed with support and comfort as the main objective -and you can tell! These skates make you feel good from the first moment you put them on. A combination of various layers of high end foam materials with different thicknesses and densities provides comfort on one side, but a supportive fit on the other side. We have designed a skate which will keep its shape over time and not let you down! Our padding construction is 3-D shaped and anatomically placed in the boot to ensure a nice fit and perfect heel lock.
The Powerslide cuff brake offers a lot of possibilities to adjust to the individual’s preferences and skating skills. This provides the skater with a secure feeling and optimal braking function. The skater has the possibility to adjust the brake to the angle they feel comfortable. The height adjustment function is perfect to find the preferred personal braking position, with a straighter leg or more angled legs. The skate comes with one brake system only. The skater has the option purchase an additional brake system if they feel more secure with one brake on each skate.